HOME  |   COMPANY  |   BLOG  |   CONTACT US  |   CART



VIEW MANUFACTURER
Sthenic Energy Conservation Product This Item Is Drop Shipped From The Manufacturer
SHARE THIS PAGE
Bookmark and Share
Plug-in Wireless Relay Switch Kit by Sthenic
  • Uses EnOcean wireless technology
  • No wires - no electrician
  • Turn on lights from another room
  • Use with under cabinet lighting
  • Switch can control multiple plug-in receivers
No electrician needed! Now you can control your lamp or other plugged in device wirelessly with a flip of a switch mounted any where you want. With a range of 50 - 150 feet the on/off switch can be placed where it is easily accessible with NO batteries or wires. Pressing the switch provides the energy to transmit a wireless signal that controls lights or other devices connected to the easy-to-install plug-in receiver.

How to install:
  • Simply plug a lamp or device into the receiver
  • Plug the receiver into a standard electrical outlet
  • Mount the switch to a surface (screw in or adhesive) or switch box
Kit includes:
  • One: Single Rock Decorator Switch (White)
  • One: Plug-in Relay Receiver

Receiver

Switch

Item No.

Vendor No.

Description

MSRP

Our Price

QTY

 

20240004

E3K-C11WH

Plug-in Wireless Relay Switch Kit FREE SHIPPING

$229.90

$184.45



Wireless Light Switch
Range
50-150 feet (typical)
Frequency
315 MHz
Power Supply
Self-generated when switch is pressed
Buttons
2 Buttons (1 rocker)
Dimensions
2.75(W) x 4.5(H) x 0.62(D) inches
Operating Temperature
-13° to +149°F (- 25° to + 65°C)
Radio Certifications
FCC (U.S.), IC (Canada)
Addressing
Factory set unique ID (1 of 4 billion)

Plug-in Relay Receiver
Range
50-150 feet (typical)
Frequency
315 MHz
Power Supply Input Rating
120VAC / 60 Hz
Output Rating:
General
Ballast
Tungsten
Motor

6A
3A
500W
N/A
Memory
Stores up to 30 unique transmitter IDs
Operating Temperature
-13° to +140°F (-25° to +60°C)
Storage Temperature
-40° to +140°F (-40° to +60°C)
Dimensions
3.26 x 2.07 x 1.42 inches
(82 x 53 x 36 mm)
Radio Certifications
FCC (United States): SZV-TCM2XXC
IC (Canada): 5713A-TCM2XXC
Safety Approval
ETL (United States): UL244A
ETL (Canada): CSAc22.2#14-05
Installation

Each package is preprogrammed to work with your switch(es) and receiver(s). If you purchased additional receivers or switches you will have to program them to communicate with each other. This is easy to accomplish and instructions will be included with your order. Always follow local electrical codes when installing this device. If you are unsure about any portion of these instructions, please contact a qualified electrician.

CAUTION: SUITABLE FOR USE ON A CIRCUIT CAPABLE OF DELIVERING NOT MORE THAN 15 RMS SYMMETRICAL AMPERES MAXIMUM. Caution: Plug-in Dimmer/Relay is intended only for use indoors, in dry locations.
  1. Plug a lamp or other device into the bottom of the Plug-in Relay Receiver.
  2. Plug the receiver into any 120 VAC power outlet.
  3. Test the range of the wireless light switch before mounting.
  4. Wireless light switches can be mounted in a standard switch box or surface mounted using screws or adhesive.



Approved by: to meet UL Standards.




Frequently Asked Questions

Why is my receiver independently turning ON and OFF?

  • This can occur when an unintended transmitter is activated within the receiver range when the receiver is in Learn Mode.
  • Clear all transmitters in the receiver and reprogram the receiver

My receiver is not responding to my transmitter command, why?

  • Move the switch closer to the receiver. If the system works at closer distance, the transmitter was installed outside the reception range, or there was radio signal interference. Repeaters that extend the coverage range are available; please contact your dealer.
  • Mount the switch or the receiver at a better location.

What is the range of my wireless connectors?

  • Masonry 65 ft. (20m), through 3 walls max.
  • Reinforced concrete 32 ft. (10m), through 1 wall / ceiling max.
  • Wood walls / drywalls 98 ft. (30m), through 5 walls max.

How can I reprogram my devices?

  • Contact customer service at (877)433-7763.




Adobe Acrobat Reader
  GED On FaceBook GED On Twitter Green Express Direct on LinkedIn 

Phone:
(877)GED-PRODUCTS

eMail:
info@greenexpressdirect.com

FAX:
(702)651-1303



SITE MAP

Support Pages
Product Pages
Social Networks
Energy
Green Express Direct