HOME  |   COMPANY  |   BLOG  |   CONTACT US  |   CART



VIEW MANUFACTURER
Sthenic Energy Conservation Product This Item Is Drop Shipped From The Manufacturer
SHARE THIS PAGE
Bookmark and Share
Wired LED Constant Voltage Dimmer Kit by Sthenic
  • Ultra smooth dimming performance even in low light
  • Energy-saver
  • Self-powered wireless light switch
  • Uses EnOcean wireless technology
  • Use for: architectural dimming, daylighting, load shedding
  • Manual ON / automatic OFF control
Constant Voltage LED Dimmers deliver 65,000 PWM dimming steps to provide ultra smooth dimming performance through all light levels. These tiny dimmers are 1/2 to 1/4 the size of other LED dimmers and overcome a major challenge faced by traditional LED dimmers; the devices eliminate the issue of choppiness at low dim levels. Through the use of thousands of PWM dimming steps, the Constant Voltage LED Dimmers create what is perceived by the natural eye as a single continuous dim -- even at low light levels. The dimmers are perfect for energy-saving applications such as architectural dimming, daylighting, load shedding, and manual ON / automatic OFF control. The dimmers may also be used for custom lighting applications. The wired dimmer responds to the wired control switch.

Kit includes:
  • One: 0-10v Dimmer Control Slider
  • One: Constant Voltage LED Dimmer

Item No.

Vendor No.

Description

MSRP

Our Price

QTY

 

20240006

E3K-O11WH

Wired LED Constant Voltage Dimmer Kit FREE SHIPPING

$139.90

$105.89



Range
N/A
Frequency
N/A
Power Supply Input Rating
8-28VDC, 40mA (not incl. load current)
Sensor Input Rating
0-28VDC, <1V is Low, >3V is High
Output Rating
Constant voltage 0-28VDC, 5A max.
Input Channels
1 motion detector / sensor input / 1 wired control switch
Output Channels
1 output / PWM dimming
Memory
N/A
Operating Temperature
-13° to +140°F (- 25° to + 60°C)
Storage Temperature
-40° to +140°F (- 40° to + 60°C)
Dimensions
2.88"(W) x 1.30"(H) x 0.67"(D)
Radio Certification
N/A
Installation

Each package is preprogrammed to work with your switch(es) and receiver(s). If you purchased additional receivers or switches you will have to program them to communicate with each other. This is easy to accomplish and instructions will be included with your order. Always follow local electrical codes when installing this device. If you are unsure about any portion of these instructions, please contact a qualified electrician.

Dimmers should NOT be installed in a location where the unit will be in close proximity to light bulbs or other sources of heat, particularly with higher wattage loads. Installation in close proximity to light bulbs or other heat sources may subject the receiver to temperature exceeding the operating temperature rating.

Installation in metallic enclosures or near large metal objects will typically reduce radio range of the Wireless Dimmer. If possible, install wireless transmitters and receivers in plastic or fiber enclosures for best performance.
  1. WARNING: To avoid fire, shock, or death, TURN OFF POWER at circuit breaker or fuse and verify that it is OFF before installation begins. Make sure that it remains OFF until installation is complete.
  2. Connect wires. Screw wire nuts on clockwise making sure no bare conductors show below the wire connectors. Secure each connection with electrical tape.
  3. Test the range of the wireless light switch before mounting.
  4. Wireless light switches can be mounted in a standard switch box or surface mounted using screws or adhesive.



Approved by: to meet UL Standards.




Frequently Asked Questions

Why is my receiver independently turning ON and OFF?

  • This can occur when an unintended transmitter is activated within the receiver range when the receiver is in Learn Mode.
  • Clear all transmitters in the receiver and reprogram the receiver

My receiver is not responding to my transmitter command, why?

  • Move the switch closer to the receiver. If the system works at closer distance, the transmitter was installed outside the reception range, or there was radio signal interference. Repeaters that extend the coverage range are available; please contact your dealer.
  • Mount the switch or the receiver at a better location.

What is the range of my wireless connectors?

  • Masonry 65 ft. (20m), through 3 walls max.
  • Reinforced concrete 32 ft. (10m), through 1 wall / ceiling max.
  • Wood walls / drywalls 98 ft. (30m), through 5 walls max.

How can I reprogram my devices?

  • Contact customer service at (877)433-7763.




Adobe Acrobat Reader
  GED On FaceBook GED On Twitter Green Express Direct on LinkedIn 

Phone:
(877)GED-PRODUCTS

eMail:
info@greenexpressdirect.com

FAX:
(702)651-1303



SITE MAP

Support Pages
Product Pages
Social Networks
Energy
Green Express Direct